Glass Tattoo® Stencil Designs
Showing 41–60 of 64 results
-
Sixteenth Note – Wafer Stencil
$9.95 Add to cartSixteenth Note – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW417 Sixteenth Note
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$9.95 -
Snail
$16.95 Add to cartSnail
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW430 Snail
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$16.95 -
Snowflake Tree
$19.95 Add to cartSnowflake Tree
Stencil Size: 5-1/4″ x 7-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Spiral Circle – Wafer Stencil
$12.95 Add to cartSpiral Circle – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW428 Spiral Circle
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$12.95 -
Spiral Square – Wafer Stencil
$12.95 Add to cartSpiral Square – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW429 Spiral Square
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$12.95 -
Star of David
$14.95 Add to cartStar of David
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW412 Star of David
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$14.95 -
Starfish
$16.95 Add to cartStarfish
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$16.95 -
Steam Heart Mug
$18.95 Add to cartSteam Heart Mug
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Steam Heart Mug
Love is in the air and this Steam Heart Mug stencil design will show how much love you have for fused glass.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Swirly Beet Bauble
$12.95 Add to cartSwirly Beet Bauble
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo® Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo® Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$12.95 -
Tribal Mask 1
$21.95 Add to cartTribal Mask 1
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Tribal Mask 1
The first in a series of stencils celebrating ancient designs and traditions
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$21.95 -
Triton Shell
$18.95 Add to cartTriton Shell
Stencil Size: 3-1/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Tube Coral
$19.95 Add to cartTube Coral
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Wafer – 5 Tropical Fish
$10.95 Add to cartWafer – 5 Tropical Fish
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – 8 Stars
$11.95 Add to cartWafer – 8 Stars
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$11.95 -
Wafer – Bald Eagle
$8.95 Add to cartWafer – Bald Eagle
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95 -
Wafer – Hammerhead Shark
$10.95 Add to cartWafer – Hammerhead Shark
Wafer Stencil Size: 5-3/4″ x 3-1/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – Hearts Galore
$28.95 Add to cartWafer – Hearts Galore
Stencil Size: 7-3/4″ x 5-7/8″ x 1/8″
Hearts Galore
This stencil makes use of our wafer technique that enables fusers to create stand alone shapes. You will make 20 different sized heart shapes that can be arranged anyway you like on your base glass before you fuse the final design.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$28.95 -
Wafer – Mako Shark
$10.95 Add to cartWafer – Mako Shark
Wafer Stencil Size: 5-3/4″ x 3-1/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – Maple Leaf
$9.95 Add to cartWafer – Maple Leaf
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
Fits Stencil Stabilizer
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$9.95 -
Wafer – Margarita Glass
$6.95 Add to cartWafer – Margarita Glass
Wafer Stencil Size: 2-5/8″ x 1-7/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$6.95