Art Glass Provisions, Selected, Tried and Evaluated in a Professional Studio Environment

Search

B105 Foot Casting Mold & Rings Bundle for Starfire

$49.95

This Bundle Includes a C105 Circle Foot Casting Mold plus 2 Fiber Ring Sets
Fuse a stemmed foot to a draped bowl using this mold & ring system
Download B105 Product Data Release in PDF Format
Transport your fused glass work to the next level by adding a ‘blown glass style’ stemmed foot to a draped bowl. Use the C105 Circle Foot Casting Mold to create a 3 1/4” (8.3 cm) diameter cast glass disk. Then place the cast foot disk on one set of F500 Stackable Fusing Foot Rings to shape the foot and fuse it to the base of a bowl during a standard drape firing schedule.

• C105 Foot Casting Mold
• 1 Set – F500 Fusing Foot Rings
• 4 page Instructional Booklet

You may also like…

  • F500-Stackable Foot Rings for the B235 Mold Kit

    Refill Packs – Fiber Foot Rings for Starfire

    $15.95$99.95
    Select options This product has multiple variants. The options may be chosen on the product page

    Refill Packs – Fiber Foot Rings for Starfire

    Two Pack: $15.95 for 2 Fiber Ring Sets ($7.98 each)

    Five Pack: $31.95 for 5 Fiber Ring Sets ($6.39 each)

    Ten Pack: $59.95 for 10 Fiber Ring Sets ($5.95 each)

    Eighteen Pack $99.95 for 18 Fiber Ring Sets ($5.55 each)

    $15.95$99.95
  • M35 Starfire Drape Mold

    $76.95
    Add to cart

    M35 Starfire Drape Mold

    The M35 Starfire Drape Mold enables fusers to create a shape that is very reminiscent of a blown glass vessel. The unconventional shape of this draping mold produces a surprisingly large bowl with six gentle waves that ripple around the perimeter.

    The mold is 12” (30.5 cm) by 4” (10.2 cm) high and can be used in most medium-sized kilns with a firing chamber that is at least 13” (33 cm) in diameter (or square) and 5 1/2” (14 cm) high.

    • M35 Starfire Drape Mold
    • 12 page Instructional Booklet

    SKU: M35 Categories: ,
    $76.95
  • Fusing Log Sheet – PDF Download

    $0.00
    Read more

    Fusing Log Sheet – PDF Download

    by Randy & Carole Wardell

    Note: This Fusing Log Pad is no longer available. However the log sheets are available to download for free.

    Simply click on the link below and it will download to you computer as a PDF and you can print as many as you need.

    Click here to download the Fusing Project Log Sheet PDF File.

    “Those who cannot remember the past are condemned to repeat it.” Truer words have never been spoken, particularly as it applies to glass fusing. There are times when we would love to repeat a perfect firing outcome or an amazing but unanticipated effect. There are other times when we encounter a disappointing result that we would like to avoid in the future. This is where record keeping plays an important role.

    This log page has easy to use ‘check boxes’ for the type and style plus space to describe the glass & components in the project. Two blank firing schedule tables are set-up in a format that is digital controller friendly. A conclusion and observation area is provided for comments and suggestions when planning similar projects in the future.

    $0.00

Description

This Bundle Includes a C105 Circle Foot Casting Mold plus 2 Fiber Ring Sets

Fuse a stemmed foot to a draped bowl using this mold & ring system

Transport your fused glass work to the next level by adding a ‘blown glass style’ stemmed foot to a draped bowl. Use the C105 Circle Foot Casting Mold to create a 3 1/4” (8.3 cm) diameter cast glass disk. Then place the cast foot disk on one set of F500 Stackable Fusing Foot Rings to shape the foot and fuse it to the base of a bowl during a standard drape firing schedule.

Adding a ‘Stemmed Foot’ to a drape bowl is simple:

  1.  Cast a 3 1/4” (85 mm) x 1/4” (6 mm) glass disk in the C105 Foot Casting Mold using leftover scrap glass pieces from your project.
  2.  Stack the F500 Foot Rings to create the ‘V’ shaped cone assembly. One set of F500 Rings is included with the C105 Foot Mold. 2-Pack refills are available for purchase enabling you to add a foot to 2 different bowls.
  3.  Place a pre-fused flat blank on a draping mold (such as the M35 Starfire mold) then center the Foot Ring cone assembly and stack the Cast Foot disk on top.
  4. Set the kiln controller to the recommended drape fire schedule to shape the bowl, create the stemmed foot profile and fuse the foot – all in the same firing.

The C105 Circle Foot Casting Mold creates a 3 1/4″ (85 mm) by 1/4″ (6mm) glass disk using leftover scrap glass pieces.

  1. Adding a ‘Stemmed Foot’ to a drape bowl is simple:
  2.  Cast a 3 1/4” (85 mm) x 1/4” (6 mm) glass disk in the C105 Foot Casting Mold using leftover scrap glass pieces from your project.
  3.  Stack the F500 Foot Rings to create the ‘V’ shaped cone assembly. One set of F500 Rings is included with the C105 Foot Mold. 2-Pack refills are available for purchase enabling you to add a foot to 2 different bowls.
  4.  Place a pre-fused flat blank on a draping mold (such as the M35 Starfire mold) then center the Foot Ring cone assembly and stack the Cast Foot disk on top.
  5.  Set the kiln controller to the recommended drape fire schedule to shape the bowl, create the stemmed foot profile and fuse the foot – all in the same firing.

F500 Stackable Foot Ring 2-Pack refills are available for purchase in attractive hanger-display packaging. The package includes 2 ring sets – enabling the user to add a foot to 2 different bowls. Suggested Retail Price: $19.95 US

The B105 Foot Casting Mold Bundle is packed for retail display in a white box with a color label. The package includes the ceramic Foot Casting Mold, one set of Stackable Foot Rings and a 4-page color booklet with step-by-step instructions. Suggested Retail Price: $58.95 US

This Graffiti Bowl -10 5/8” x 7 1/2” x 5” (27 x 19 x 13 cm) was created on an M35 Starfire Drape mold with stemmed foot added using the foot mold and rings system. eProject available for free, see below

F500 Stackable Foot Ring Refills are available for purchase.

FREE – Graffiti Bowl ePattern for the M35 Starfire Drape Mold with Step-by-Step Instructions to add a Stemmed Foot using the Foot Mold and Rings System.

The M35 Starfire Drape Mold is featured in Wardell Publications book ‘Joy of Fusing’ (on page 35). This unusual mold enables fusers to create a shape in their kiln that is strikingly reminiscent of a blown glass bowl. This full-size ePattern for the Graffiti Bowl is provided to support the detailed instructions in the 12-page color booklet that is included with the M35 Starfire Drape Mold or the B235 Starfire Bundle.

To get this Graffiti Bowl eProject simply Register your Starfire Mold then download the eProject immediately.

Additional information

Weight 30 oz
Dimensions 7.5 × 5.5 × 3 in
Fusing Mold

Binasphere Slump Mold, Casting-Mold, Cutter-Guide, Drop-Thru Mold, Ring-Only, Starfire Drape Mold

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.