Store
Showing 121–140 of 156 results
-
Steam Heart Mug
$18.95 Add to cartSteam Heart Mug
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Steam Heart Mug
Love is in the air and this Steam Heart Mug stencil design will show how much love you have for fused glass.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Strung Out Bowl with Cast Foot made on the S210 Flutter Mold Bundle – eProject
$4.99 Add to cartStrung Out Bowl with Cast Foot made on the S210 Flutter Mold Bundle – eProject
eProject – Strung Out Bowl with Cast Foot
A 22 page Step-by-step Instructional eProject with an 18 minute Step-by-Step VideoThe B210 Flutter Mold Bundle includes the S210 Flutter slump mold along with the C105 Foot Casting mold that enables fusers to create a shape that is very reminiscent of a blown glass bowl with a cookie style foot. The Finished bowl id: 11 1/2” x 2 5/8” (28.6 x 5.7 cm).
Project at a Glance
- Finished Project Size: 11 1/2” x 2 5/8” (28.6 x 5.7 cm)
- Molds Required:
- S210 Flutter Bowl Mold
- C105 – Foot Casting Mold
$4.99 -
Suction Lifter Tabs
$1.95 – $3.95 Select options This product has multiple variants. The options may be chosen on the product pageSuction Lifter Tabs
Suction Lifter Tabs are placed on the outer edge of the stencil to enable you to lift the stencil after you have filled it with your Glass Tattoo® Gue colors. Two Suction Lifter Tabs are required for each stencil but they can be removed easily and used again on a different stencil. Many Glass Tattoo® crafters like to have at least 3 sets (or even 6 sets) to have several stencils prepared and ready to go.
Two Pack: $1.95
Six Pack: $3.95
Twelve Pack: $5.95
$1.95 – $3.95 -
Swirly Beet Bauble
$12.95 Add to cartSwirly Beet Bauble
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo® Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo® Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$12.95 -
Terrariums & Planters
$18.45 – $22.95 Select options This product has multiple variants. The options may be chosen on the product pageTerrariums & Planters
by Randy Wardell
Full-size Patterns for 30 Plant Container Projects
These 30 projects bring glass art and nature together offering unique plant containers from simple plant pots, hanging gardens and elaborate terrariums in many sizes and styles.
The Terrariums & Planters in this book combine the satisfaction of horticulture with the craft of stained glass. This book includes patterns for 30 plant container designs covering a wide range of applications from simple plant pots to elaborate terrariums in sizes and styles to suit every need. The step-by-step instructions will guide the reader through the basic stained-glass assembly process.
This book is available as a Printed Book (requires shipping) or as a downloadable eBook (a PDF file). If you choose the eBook version you will have access to download the book immediately after purchase and save it to your computer, tablet or smart phone. You can open the eBook to view it anytime and you can print any page or the entire book whenever you choose. You can also move the PDF file from your computer to your tablet or smart phone (or vice-versa) using standard transfer methods.
Choose Print Book or eBook from the Dropdown Menu below, then add it to the Shopping Cart.
Print Book $22.95 ~ Download eBook $18.45
$18.45 – $22.95 -
Sale!
The Art of Stained Glass
Original price was: $39.95.$29.95Current price is: $29.95. Add to cartThe Art of Stained Glass
Available as Hard Cover Print Book Only
Church Windows In Northeast Pennsylvania
Hard Cover Book, 116 Pages with 40 Color Photos offer a Wealth of Inspiring Historical Stained Glass Windows, many By The Famous Tiffany Studios.
Edited by Richard W Rousseau, S.J.
This beautifully illustrated book celebrates the religious significance, artistic beauty, and regional importance of these windows by reproducing them in full color. Dr. Virginia Raguin of Holy Cross College, a well-known stained-glass scholar, gives them context with a general historical/artistic will go in introduction to the book and brief introductions to the eight churches involved. Maureen Brennan briefly summarizes key historical and informative data for each window, including the many Tiffany’s. These windows and this book are a tribute to the religious and artistic vigor of an important American region in its prime.
Published Retail Price: $39.95
Sale Print Book $29.95 (plus shipping)
Original price was: $39.95.$29.95Current price is: $29.95. -
Tribal Mask 1
$21.95 Add to cartTribal Mask 1
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Tribal Mask 1
The first in a series of stencils celebrating ancient designs and traditions
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$21.95 -
Triton Shell
$18.95 Add to cartTriton Shell
Stencil Size: 3-1/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Tube Coral
$19.95 Add to cartTube Coral
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Tunnel Funnel Vase Made on a Circle-Square Drop-Thru Mold – eProject & HD Video
$4.99 Add to cartTunnel Funnel Vase Made on a Circle-Square Drop-Thru Mold – eProject & HD Video
eProject – Tunnel Funnel Vase made on the Circle-Square Drop-Thru Mold
A 18 page eProject with a 15 minute Instructional VideoProject at a Glance
- Finished Project Size: 5” x 7 1/4” (12.7 x 18.4 cm)
- Mold Required: DT310 Circle-Square Drop Thru Ring Mold
- Kiln Firings: 3 Total
- Foot Disk Casting in foot mold
- Object Design Disk Flat Fuse
- Drop Thru Forming into mold
$4.99 -
Video – Hot Fritage Vase made on the B300 Drop-Thru
$2.99 Add to cartVideo – Hot Fritage Vase made on the B300 Drop-Thru
A 15 minute instructional video showing how to create a fused glass vase using the Frittage design style and the B300 Fluted Ring Drop-Thru mold from Wardell Publications.
$2.99 -
Video – Strip Frieze Tray shaped on a Sushi style mold
$2.99 Add to cartVideo – Strip Frieze Tray shaped on a Sushi style mold
This is a 21 minute instructional video showing how to make a fused glass tray using the Strip-frieze fusing method that uses strips of glass standing on edge. The shape is created using a rectangle Sushi style ceramic mold.
$2.99 -
Wafer – 5 Tropical Fish
$10.95 Add to cartWafer – 5 Tropical Fish
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – 8 Stars
$11.95 Add to cartWafer – 8 Stars
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$11.95 -
Wafer – Bald Eagle
$8.95 Add to cartWafer – Bald Eagle
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95 -
Wafer – Hammerhead Shark
$10.95 Add to cartWafer – Hammerhead Shark
Wafer Stencil Size: 5-3/4″ x 3-1/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – Hearts Galore
$28.95 Add to cartWafer – Hearts Galore
Stencil Size: 7-3/4″ x 5-7/8″ x 1/8″
Hearts Galore
This stencil makes use of our wafer technique that enables fusers to create stand alone shapes. You will make 20 different sized heart shapes that can be arranged anyway you like on your base glass before you fuse the final design.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$28.95 -
Wafer – Mako Shark
$10.95 Add to cartWafer – Mako Shark
Wafer Stencil Size: 5-3/4″ x 3-1/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – Maple Leaf
$9.95 Add to cartWafer – Maple Leaf
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
Fits Stencil Stabilizer
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$9.95 -
Wafer – Margarita Glass
$6.95 Add to cartWafer – Margarita Glass
Wafer Stencil Size: 2-5/8″ x 1-7/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$6.95