Store
Showing 141–160 of 188 results
-
Treble Clef
$12.95 Add to cartTreble Clef
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW419 Treble Clef
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$12.95 -
Tree Branch Coral
$19.95 Add to cartTree Branch Coral
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
CW423 Tree Branch Coral
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Tribal Mask 1
$21.95 Add to cartTribal Mask 1
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Tribal Mask 1
The first in a series of stencils celebrating ancient designs and traditions
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$21.95 -
Triton Shell
$18.95 Add to cartTriton Shell
Stencil Size: 3-1/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Tube Coral
$19.95 Add to cartTube Coral
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Tunnel Funnel Vase Made on a Circle-Square Drop-Thru Mold – eProject & HD Video
$4.99 Add to cartTunnel Funnel Vase Made on a Circle-Square Drop-Thru Mold – eProject & HD Video
eProject – Tunnel Funnel Vase made on the Circle-Square Drop-Thru Mold
A 18 page eProject with a 15 minute Instructional VideoProject at a Glance
- Finished Project Size: 5” x 7 1/4” (12.7 x 18.4 cm)
- Mold Required: DT310 Circle-Square Drop Thru Ring Mold
- Kiln Firings: 3 Total
- Foot Disk Casting in foot mold
- Object Design Disk Flat Fuse
- Drop Thru Forming into mold
$4.99 -
Turtle Spiral CS311
$18.95 Add to cart -
Video – Hot Fritage Vase made on the B300 Drop-Thru
$2.99 Add to cartVideo – Hot Fritage Vase made on the B300 Drop-Thru
A 15 minute instructional video showing how to create a fused glass vase using the Frittage design style and the B300 Fluted Ring Drop-Thru mold from Wardell Publications.
$2.99 -
Video – Strip Frieze Tray shaped on a Sushi style mold
$2.99 Add to cartVideo – Strip Frieze Tray shaped on a Sushi style mold
This is a 21 minute instructional video showing how to make a fused glass tray using the Strip-frieze fusing method that uses strips of glass standing on edge. The shape is created using a rectangle Sushi style ceramic mold.
$2.99 -
Wafer – 2 Bulbs
$7.95 Add to cartWafer – 2 Bulbs
Wafer Stencil Size: 2-5/8″ x 1-7/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$7.95 -
Wafer – 4 Fruits
$10.95 Add to cartWafer – 4 Fruits
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – 5 Tropical Fish
$10.95 Add to cartWafer – 5 Tropical Fish
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$10.95 -
Wafer – 8 Stars
$11.95 Add to cartWafer – 8 Stars
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$11.95 -
Wafer – Bald Eagle
$8.95 Add to cartWafer – Bald Eagle
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95 -
Wafer – Ballet Bauble
$9.95 Add to cartWafer – Ballet Bauble
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$9.95 -
Wafer – Beet Bauble
$8.95 Add to cartWafer – Beet Bauble
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95 -
Wafer – Bulbs & Holly – Large
$36.95 Add to cartWafer – Bulbs & Holly – Large
Use this Bulbs & Holly stencil to create 15 holiday light bulbs and 3 holly leaves as components to make a Holiday Lights Platter or Bowl.
Wafer Stencil Size: 7-7/8″ x 7-7/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$36.95 -
Wafer – Butterfly Mini 1
$7.95 Add to cartWafer – Butterfly Mini 1
Wafer Stencil Size: 2-5/8″ x 1-7/8″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$7.95 -
Wafer – Butterfly Open
$8.95 Add to cartWafer – Butterfly Open
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95 -
Wafer – Butterfly Side
$8.95 Add to cartWafer – Butterfly Side
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$8.95