Strung Out Bowl with Cast Foot made on the S210 Flutter Mold Bundle – eProject

You may also like…

• 

  S210 Flutter Mold (without foot mold)

  $169.95 Add to cart

  S210 Flutter Mold (without foot mold)

  The S210 Flutter Mold enables fusers to create an 11 1/4” (28.5 cm) bowl.

  1. The first step is to design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
  2. The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.

  Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).

  Mold Package Contains:

  • S210 Flutter Slump Mold
  • 4 page Instructional Booklet includes firing schedules
  • 1 free eProject available for download

   

  Click Here to Download the S210 Flutter Mold Instruction Booklet

  SKU: S210 Categories: Fusing Molds, Slumping Molds

  $169.95
• 

  B210 Flutter Mold Bundle with C105 Foot Casting Mold

  $195.95 Add to cart

  B210 Flutter Mold Bundle with C105 Foot Casting Mold

  The B210 Flutter Mold Bundle enables fusers to create an 11 1/4” (28.5 cm) bowl with a cookie-style foot in a three-step process.

  1. The first step is to cast a glass foot using our C105 foot casting mold. That mold is included in the B210 bundle or you may already own that mold if you have the B235 Starfire mold bundle. You will need 130 grams of glass shards to cast the foot disk.
  2. Then design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
  3. The final step is to slump your design disk into the Flutter Mold to shape the bowl while at the same time attaching the cast glass foot by tack fusing it to the underside.

  Note: You can create a beautiful bowl without adding the cast glass foot. Simply create your design disk, place it on the mold and follow the slump firing schedule. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.

  Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).

  Mold Package Contains:

  • S210 Flutter Slump Mold
  • C105 Foot Disk Casting Mold
  • 4 page Instructional Booklet includes firing schedules
  • 1 free eProject available for download

   

  Click Here to Download the B210 Flutter Mold Bundle Instruction Booklet

  SKU: B210 Categories: Fusing Molds, Slumping Molds

  $195.95