S220 WavEdge Mold (without foot mold)

The S220 WavEdge Mold enables glass fusers to create a platter that is 9” square x 2” high (23 x 5 cm), with a square drop-slump foot, in a two-step process.

WavEdge Mold Process Overview

1. The first step is to design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design. Or you could simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star (see example in the photo gallery using Freemont Glass).
2. The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.

Mold Package Contains:

• S220 WavEdge Slump Mold
• 4 page Instructional Booklet
• Weblink to download one eProject with Video

Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)

Click Here to Download the B220 WavEdge Mold Instruction Booklet