Store
Showing 101–120 of 156 results
-
Sawtooth Bowl Made on a BinaSphere Mold – eProject & HD Video
$4.99 Add to cartSawtooth Bowl Made on a BinaSphere Mold – eProject & HD Video
eProject – Sawtooth Bowl with Cast Foot made on a Binasphere Mold
A 27 page eProject with a 21 minute Instructional VideoProject at a Glance
- Finished Project Size: 11 1/4” x 2 1/4” (28.6 x 5.7 cm)
- Mold Required: S205 BinaSphere
- Kiln Firings: 3 Total
- Foot Disk Casting in mold
- Object Design Flat Fuse
- Slump Forming into mold
$4.99 -
Scallop Shell
$18.95 Add to cartScallop Shell
Stencil Size: 3-3/4″ x 4-3/4″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Scottish Terrier
$18.95 Add to cartScottish Terrier
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$18.95 -
Seahorse
$24.95 Add to cartSeahorse
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$24.95 -
Single Iris
$19.95 Add to cartSingle Iris
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Fits the GT Stencil Stabilizer
Single Iris
Fresh Flowers are always welcome and this Single Iris will stay fresh forever as a fused glass art piece.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Single Rose
$20.95 Add to cartSingle Rose
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Fits the GT Stencil Stabilizer
Single Rose
Fresh Flowers are always welcome and this Single Rose will stay fresh forever as a fused glass art piece.
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$20.95 -
Sixteenth Note – Wafer Stencil
$9.95 Add to cartSixteenth Note – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW417 Sixteenth Note
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$9.95 -
Snail
$16.95 Add to cartSnail
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW430 Snail
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$16.95 -
Snowflake Platter on Binasphere Mold HD Video
$3.99 Add to cartSnowflake Platter on Binasphere Mold HD Video
This is a 22 minute video, with step-by-step instruction to fabricate and fuse a 12″ diameter Fritage Snowflake Platter. Learn how to use the Binasphere Mold by Wardell Publications, to create the cast glass foot then use that same mold to slump your design disk into the platter shape with the cast glass foot attached to the bottom.
$3.99 -
Snowflake Tree
$19.95 Add to cartSnowflake Tree
Stencil Size: 5-1/4″ x 7-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$19.95 -
Spiral Circle – Wafer Stencil
$12.95 Add to cartSpiral Circle – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW428 Spiral Circle
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$12.95 -
Spiral Square – Wafer Stencil
$12.95 Add to cartSpiral Square – Wafer Stencil
Wafer Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW429 Spiral Square
A Glass Tattoo® Wafer is an air-dried design component that can be arranged on your base glass in combination with other Glass Tattoo® Wafers or with a Standard Glass Tattoo® Stencil design. Glass Tattoo® Wafers are created in almost the same way as a standard Glass Tattoo® Stencil Design, the difference is a wafer is created on a sheet of smooth clear acetate (overhead transparency plastic) or similar type of plastic sheeting. Wait until the wafers are completely dry (24-48 hours) then carefully lift the wafer design off the plastic. Glass Tattoo® Wafers are remarkably strong, but they will break, so be gentle.
Now you can arrange the wafers on your base glass in any pattern you wish. Paste the wafers down using a small dab of Gue then add any other adornment components you choose to finish your masterpiece.
$12.95 -
Spreader Knife – Diamond & Square Shaped
$3.95 – $6.95 Select options This product has multiple variants. The options may be chosen on the product pageSpreader Knife – Diamond & Square Shaped
After you have filled the stencil cavities with the Glass Tattoo color mix, you need to spread the color evenly across the surface of the stencil. We offer 2 different shapes of spreader knives.
- $3.95 – GTKS1 has a rectangle shaped knife blade with a large surface area that extends across most larger stencil cavities. The overall knife including the handle is 8 3/4″ long (22 cm)
- $3.95 – GTKD1 has a diamond shaped knife blade that enables precision control of the Glass Tattoo color as you spread it into the smaller stencil cavities. The overall knife including the handle is 8 3/8″ long (21 cm)
- $6.95 – GTK2P – Spreader Knife – 2 Piece Set. Both knives are invaluable when working with the Glass Tattoo® Stencil System and we always recommend the 2 piece set for the most flexibility.
Note: SALE ENDS April 1, 2020
$3.95 – $6.95 -
Squeeze Bottles
$12.95 – $21.95 Select options This product has multiple variants. The options may be chosen on the product pageSqueeze Bottles
The secret to the Glass Tattoo® System is the ability to precisely fill the stencil cavities with the color mix that you want. These bottles are the key! The Glass Tattoo® Squeeze Bottles have a soft feel and are easy to squeeze. The opening in the top is larger than standard squeeze bottles making them easier to fill. Plus the amount is indicated on the side in both ounces and milliliters. The hole size in the nozzle is perfect for both freehand drawing and to fill the cavity spaces in the stencils. Each bottle comes with a red sealer cap to keep your Glass Tattoo® Colors fresh and ready to use for weeks.
6 Pack $12.95
12 Pack $21.95
$12.95 – $21.95 -
SSM812 Oval Stainless Steel Fusing Mold
$34.95 Add to cartSSM812 Oval Stainless Steel Fusing Mold
This 11 7/8″ by 8″ oval stainless steel mold will enable fusers to shape a beautiful 11 3/8″ x 7 1/2″ oval tray. The flat oval design can be either a single layer of glass (1/8” thick) with your design on it or it could be a double layer of glass (1/4” thick) plus design. This mold needs to be prepared by lightly sanding the surface with a very fine grit sandpaper or emery cloth then a good coating of mold release.
Click here to download the SSM812 Instruction Manual with oval pattern
$34.95 -
Stained Glass Box – Ovals & Diamonds – eProject
$2.99 Add to cartStained Glass Box – Ovals & Diamonds – eProject
This eProject contains everything you’ll need to learn how to create a stained glass box. The fabrication technique is universally applicable to the vast majority of stained glass boxes. The streaming video will show you every step in the process and that is repeated in the step by step lesson section. The best way to learn is by doing, so put your newly acquired knowledge to work by following the photographic lessons as you build the stained glass box project that is included in this eProject.
- Make this Ovals & Diamonds stained glass box using the full-size pattern that is included in this eProject.
- Watch a 10 minute instruction video to learn the fabrication process from start to finish.
- Link to the Video is on page 4 of this PDF eProject Booklet.
- Step-by-step fabrication tutorial, with detailed text & color photos.
- ProTips & Unique Tactics to make box construction trouble-free.
- Hinge installation mysteries revealed with two variations.
$2.99 -
Stained Glass Boxes
$15.95 – $19.95 Select options This product has multiple variants. The options may be chosen on the product pageStained Glass Boxes
by Randy Wardell
This book provides full-sized patterns for 34 stained glass boxes, complete with a material list and a comprehensive 8 page how-to section to guide all crafters new to the box fabrication process. Offering a wide range of design selections that are sure to please including several flowers, a heart shape, a rainbow, an antique car, music notes, a sailboat, and several geometric designs to name only a few.
This book is available as a Printed Book (requires shipping) or as a downloadable eBook (a PDF file). If you choose the eBook version you will have access to download the book immediately after purchase and save it to your computer, tablet or smart phone. You can open the eBook to view it anytime and you can print any page or the entire book whenever you choose. You can also move the PDF file from your computer to your tablet or smart phone (or vice-versa) using standard transfer methods.
‘Choose an option’ Menu below:
Print Book $19.95 (plus shipping) ~ Downloadable eBook $15.95
$15.95 – $19.95 -
Stained Glass Workshop Sessions
$99.00 – $178.00 Select options This product has multiple variants. The options may be chosen on the product pageStained Glass Workshop Sessions
Workshop Outline
- Each Session: 3 hours
- Session fees:
- 2 sessions (x3 hrs ea) for $99 ($49.50 ea)
- 4 sessions (x3 hrs ea) for $178 (44.50 ea)
- Includes: the use of our shop tools, equipment and guidance from our instructor
Guided Workshop Sessions for both stained glass and fused glass crafters are designed for people who already have some experience working with art glass and are looking to use a fully equipped glass studio that comes with a qualified instructor to offer advice and assistance.
Note: These are Workshop Sessions only; glass, materials and other consumables are NOT included, and kiln firings are an additional charge.
Stained Glass Workshop Sessions are held Saturday Afternoons from 2 to 5 pm.
Purchase your workshop sessions THEN call or text Carole at: 954-465-4910 to book your workshop date.
$99.00 – $178.00 -
Star of David
$14.95 Add to cartStar of David
Stencil Size: 3-1/2″ x 3-1/2″ x 1/8″
CW412 Star of David
Whether you are a new or experienced fuser you will find this Glass Tattoo™ Stencil & Tattoo Gue product fun and easy to use. Glass Tattoo™ Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Gue and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Gue with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$14.95 -
Starfish
$16.95 Add to cartStarfish
Stencil Size: 3-7/8″ x 5-7/8″ x 1/8″
Whether you are a new or experienced fuser you will find this Glass Tattoo Stencil & Tattoo Goo product fun and easy to use. Glass Tattoo Stencils are custom cut from 1/8 inch thick clear acrylic. Simply place the Tattoo Stencil on a piece of fusing glass then fill the stencil cavities with a 50/50 mixture of Tattoo Goo and powdered frit glass using a squeeze bottle applicator. Then level and smooth the Tattoo Goo with an artist’s palette knife, add any additional decorative components such as stringers, coarse fit, etc. Then lift the stencil straight up to reveal your masterful creation.
$16.95