Fusing Molds
All Fusing Molds
Showing 1–20 of 21 results
-
B235 Starfire Bundle
$129.95 Add to cartB235 Starfire Bundle
This Ceramic Mold Bundle enables Fusers to create a 10″ diameter by 4-1/2″ high bowl. First cast a Foot Disk in the casting mold then Drape the Bowl and fuse the Foot in the same firing.
Bundle Package contains:
- M35 Starfire Drape Mold
- C105 Foot Casting Mold
- 3 sets – F500 Stackable Fiber Foot Rings
- 12 page Instructional Booklet
$129.95 -
B300 Fluted Drop-Thru Mold Bundle
$159.95 Add to cartB300 Fluted Drop-Thru Mold Bundle
Create a Dramatic Footed Vase with a Fluted Rim using this 3-Piece Drop-Thru Mold that Automatically Aligns the Drop to the Center of a Wine-Glass Style Foot. This innovative Drop-Thru Mold Forming System enables fusers to create a delicate vase shape in a kiln that is remarkably similar to vessels made using traditional glass blowing techniques.
Bundle Package Contains:
- DT305 Fluted Drop-Thru Ring
- DT301 Tripod Base
- C100 Foot Casting Mold
- 4 page Instructional Booklet
$159.95 -
M35 Starfire Drape Mold
$76.95 Add to cartM35 Starfire Drape Mold
The M35 Starfire Drape Mold enables fusers to create a shape that is very reminiscent of a blown glass vessel. The unconventional shape of this draping mold produces a surprisingly large bowl with six gentle waves that ripple around the perimeter.
The mold is 12” (30.5 cm) by 4” (10.2 cm) high and can be used in most medium-sized kilns with a firing chamber that is at least 13” (33 cm) in diameter (or square) and 5 1/2” (14 cm) high.
• M35 Starfire Drape Mold
• 12 page Instructional Booklet$76.95 -
Sale!
PGM101 Arched Drape Mold
Original price was: $59.95.$30.00Current price is: $30.00. Add to cartPGM101 Arched Drape Mold
DISCONTINUED MOLD – Only a few left in stock.
Use this arched drape mold to create a freestanding sculpture. The hot sculpted art piece you create can be lit from behind using a bubble lite (battery operated), made as a wall sconce, or the sculpture can be positioned in a display on its own, without back lighting.
- Mold size: 6” x 4” x 2” high
- Glass blank size: 4” x 7 1/2”
- Ultra-smooth surface
- Reusable ceramic mold
Original price was: $59.95.$30.00Current price is: $30.00. -
B105 Foot Casting Mold & Rings Bundle for Starfire
$49.95 Add to cartB105 Foot Casting Mold & Rings Bundle for Starfire
This Bundle Includes a C105 Circle Foot Casting Mold plus 2 Fiber Ring Sets
Fuse a stemmed foot to a draped bowl using this mold & ring system
Download B105 Product Data Release in PDF Format
Transport your fused glass work to the next level by adding a ‘blown glass style’ stemmed foot to a draped bowl. Use the C105 Circle Foot Casting Mold to create a 3 1/4” (8.3 cm) diameter cast glass disk. Then place the cast foot disk on one set of F500 Stackable Fusing Foot Rings to shape the foot and fuse it to the base of a bowl during a standard drape firing schedule.• C105 Foot Casting Mold
• 1 Set – F500 Fusing Foot Rings
• 4 page Instructional Booklet$49.95 -
C100 Foot Casting Mold for Drop-Thru
$44.95 Add to cartC100 Foot Casting Mold for Drop-Thru
The C100 Foot Casting Mold, used to create a 2 7/8” (73 mm) diameter x 1/4” (64 mm) thick cast glass foot disk using our ‘Scrap Casting’ technique. This mold works with our Drop-Thru Vase Mold System only.
Note: If you are looking for the Foot Casting Mold for the Starfire Mold or the Flutter Mold you want the C105 Foot Casting Mold
$44.95 -
DT310 Circle-Square Drop-Thru Ring
$79.95 Add to cartDT310 Circle-Square Drop-Thru Ring
The DT310 Circle-Square Drop-Thru Ring works with the DT301 Tripod Base and the C100 Foot Casting Mold to enable fusers to create a drop-vase with a wine glass style foot. The DT310 Circle-Square Drop-Thru Ring shapes and guides the hot glass to drop onto the cast foot disk (created in the C100 Foot Casting Mold) that is waiting in the foot cup of the DT301 Tripod Base.
For more information see the B310 Drop-Thru Mold Bundle
$79.95 -
B210 Flutter Mold Bundle with C105 Foot Casting Mold
$195.95 Add to cartB210 Flutter Mold Bundle with C105 Foot Casting Mold
The B210 Flutter Mold Bundle enables fusers to create an 11 1/4” (28.5 cm) bowl with a cookie-style foot in a three-step process.
- The first step is to cast a glass foot using our C105 foot casting mold. That mold is included in the B210 bundle or you may already own that mold if you have the B235 Starfire mold bundle. You will need 130 grams of glass shards to cast the foot disk.
- Then design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
- The final step is to slump your design disk into the Flutter Mold to shape the bowl while at the same time attaching the cast glass foot by tack fusing it to the underside.
Note: You can create a beautiful bowl without adding the cast glass foot. Simply create your design disk, place it on the mold and follow the slump firing schedule. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).
Mold Package Contains:
- S210 Flutter Slump Mold
- C105 Foot Disk Casting Mold
- 4 page Instructional Booklet includes firing schedules
- 1 free eProject available for download
Click Here to Download the B210 Flutter Mold Bundle Instruction Booklet
$195.95 -
B220 WavEdge Mold Bundle with C110 Square Foot Casting Mold
$165.95 Add to cartB220 WavEdge Mold Bundle with C110 Square Foot Casting Mold
The B220 WavEdge Mold Bundle enables glass fusers to create a platter that is 9” square x 2” high, with a square cookie style foot, in a three-step process (23 x 5 cm).
WavEdge Mold Process Overview
- The first step is to cast a glass foot disk using the C110 foot casting mold and 5.6 oz (160 g) of scrap-glass shards.
- Then design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
- The final step is to slump the design into the WavEdge Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Create your 9 square design, place it on the S220 mold and follow the slump firing schedule. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Bundle Package Contains:
- S220 WavEdge Slump Mold
- C110 Square Foot Casting Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B220 WavEdge Mold Instruction Booklet
$165.95 -
B225 Sushi-rise Mold Bundle with C110 Square Foot Casting Mold
$165.95 Add to cartB225 Sushi-rise Mold Bundle with C110 Square Foot Casting Mold
The Sushi-rise Mold Bundle enables glass fusers to create a sushi style platter that is 8.5” x 10.25” rectangle x 1-3/4” high (215 x 260 x 4.5 cm), with a square cookie style foot, in a three-step process.
- The first step is to cast a glass foot disk using the C110 foot casting mold and 5 oz (140 g) of scrap-glass shards.
- Then design and fuse a 8.5” x 10.25” (215 x 260) rectangle flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut your rectangle from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
- The final step is to slump the design into the Sushi-rise Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Create your rectangle design, place it on the S225 mold and follow the slump firing schedule. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.
Note: The fusing kiln chamber must be minimum 14” diameter by 6” deep (36 x 15 cm)
Click Here to Download the B225 Sushi-rise Mold Instruction Booklet
$165.95 -
S205 BinaSphere Cast and Slump Mold
$189.95 Add to cartS205 BinaSphere Cast and Slump Mold
It’s Two Molds in One – Create a 12″ Footed Bowl or a 12″ Footed Platter
One side of the BinaSphere Mold produces a true spherical-shaped 12″ diameter bowl with a cookie-style foot that is remarkably similar to vessels made by master glass blowers. The opposite side of the BinaSphere Mold produces a 12″ diameter flat serving platter. Both the Platter and the Bowl are elevated 5/8” (16 mm) on a cast glass foot that is also created in the Binasphere mold (in a separate cast firing).
Note: Kiln chamber must be minimum 13” diameter by 6” deep.
Mold Package Contains:
- S205 BinaSphere Cast-Slump Mold
- 4 page Instructional Booklet includes firing schedules
- 2 free eProjects available for Download
$189.95 -
S210 Flutter Mold (without foot mold)
$169.95 Add to cartS210 Flutter Mold (without foot mold)
The S210 Flutter Mold enables fusers to create an 11 1/4” (28.5 cm) bowl.
- The first step is to design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).
Mold Package Contains:
- S210 Flutter Slump Mold
- 4 page Instructional Booklet includes firing schedules
- 1 free eProject available for download
Click Here to Download the S210 Flutter Mold Instruction Booklet
$169.95 -
S220 WavEdge Mold (without foot mold)
$139.95 Add to cartS220 WavEdge Mold (without foot mold)
The S220 WavEdge Mold enables glass fusers to create a platter that is 9” square x 2” high (23 x 5 cm), with a square drop-slump foot, in a two-step process.
WavEdge Mold Process Overview
- The first step is to design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design. Or you could simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star (see example in the photo gallery using Freemont Glass).
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Package Contains:
- S220 WavEdge Slump Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B220 WavEdge Mold Instruction Booklet
$139.95 -
S225 Sushi-rise Mold (without foot casting mold)
$139.95 Add to cartS225 Sushi-rise Mold (without foot casting mold)
The S225 Sushi-rise Mold enables glass fusers to create a platter that is 9” square x 2” high (23 x 5 cm), with a square drop-slump foot, in a two-step process.
S225 Sushi-rise Mold Process Overview
- The first step is to design and fuse a 8.5” x 10.25” (215 x 260) rectangle flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut your rectangle from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star (see example in the photo gallery using green baroque glass).
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Package Contains:
- S225 Sushi-rise Slump Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B225 Sushi-rise Mold Instruction Booklet
$139.95 -
B310 Circle-Square Drop-Thru Mold Bundle
$159.95 Add to cartB310 Circle-Square Drop-Thru Mold Bundle
Create a Contemporary Footed Vase using this 3-Piece Drop-Thru Mold that Automatically Aligns the Glass Drop to the Center of a Wine-Glass Style Foot. The process starts with a 2 layer circle design that Drops-Thru a square hole in the ring mold then the glass drop is automatically aligned to hit and fuse to the center of a pre-cast glass foot disk. Turn the mold ring 1/3 of a revolution to change the height for 3 different vase dimensions: 5” (13cm), 4-3/8” (11cm) & 3-3/4” (9.5cm)
Bundle Package Contains:
- DT310 Circle-Square Drop-Thru Ring
- DT301 Tripod Base
- C100 Foot Casting Mold
- 4 page Instructional Booklet
$159.95 -
C105 Foot Casting Mold (for Flutter & Starfire Molds)
$42.95 Add to cartC105 Foot Casting Mold (for Flutter & Starfire Molds)
This is the same foot casting mold that comes with the B235 Starfire Mold Bundle AND the S210 Flutter Mold Bundle. Purchasing additional molds will enable you to cast multiple foot castings in a single kiln load.
$42.95 -
C110 Square Foot Casting Mold for WavEdge
$45.95 Add to cartC110 Square Foot Casting Mold for WavEdge
This is the same square foot casting mold that comes with the B220 WavEdge Mold Bundle. Purchasing additional molds will enable you to cast multiple foot castings in a single kiln load. Note: This is sold as the mold only and does not include the ZYP Lubricoat or any cast glass items.
$45.95 -
DT301 Drop-Thru Support Base
$79.95 Add to cartDT301 Drop-Thru Support Base
DT301 Drop-Thru Tripod Support Base (base only)
• To replace the Tripod Support Base mold included in the B300 & B310 Drop-Thru Bundles.
• This package does not include the Instructional Booklet, the foot casting mold or the drop ring mold.
$79.95 -
DT305 Fluted Drop-Thru Ring
$79.95 Add to cartDT305 Fluted Drop-Thru Ring
The DT305 Fluted Drop-Thru Ring works with the DT301 Tripod Base and the C100 Foot Casting Mold to enable fusers to create a drop-vase with a wine glass style foot. The DT305 Fluted Drop-Thru Ring shapes and guides the hot glass to drop onto the cast foot disk (created in the C100 Foot Casting Mold) that is waiting in the foot cup of the DT301 Tripod Base.
For more information see the B300 Drop-Thru Mold Bundle
$79.95 -
Refill Packs – Fiber Foot Rings for Starfire
$15.95 – $99.95 Select options This product has multiple variants. The options may be chosen on the product pageRefill Packs – Fiber Foot Rings for Starfire
Two Pack: $15.95 for 2 Fiber Ring Sets ($7.98 each)
Five Pack: $31.95 for 5 Fiber Ring Sets ($6.39 each)
Ten Pack: $59.95 for 10 Fiber Ring Sets ($5.95 each)
Eighteen Pack $99.95 for 18 Fiber Ring Sets ($5.55 each)
$15.95 – $99.95