Slumping Molds
Slumping Molds
Showing all 10 results
-
B210 Flutter Mold Bundle with C105 Foot Casting Mold
$195.95 Add to cartB210 Flutter Mold Bundle with C105 Foot Casting Mold
The B210 Flutter Mold Bundle enables fusers to create an 11 1/4” (28.5 cm) bowl with a cookie-style foot in a three-step process.
- The first step is to cast a glass foot using our C105 foot casting mold. That mold is included in the B210 bundle or you may already own that mold if you have the B235 Starfire mold bundle. You will need 130 grams of glass shards to cast the foot disk.
- Then design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
- The final step is to slump your design disk into the Flutter Mold to shape the bowl while at the same time attaching the cast glass foot by tack fusing it to the underside.
Note: You can create a beautiful bowl without adding the cast glass foot. Simply create your design disk, place it on the mold and follow the slump firing schedule. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).
Mold Package Contains:
- S210 Flutter Slump Mold
- C105 Foot Disk Casting Mold
- 4 page Instructional Booklet includes firing schedules
- 1 free eProject available for download
Click Here to Download the B210 Flutter Mold Bundle Instruction Booklet
$195.95 -
B220 WavEdge Mold Bundle with C110 Square Foot Casting Mold
$165.95 Add to cartB220 WavEdge Mold Bundle with C110 Square Foot Casting Mold
The B220 WavEdge Mold Bundle enables glass fusers to create a platter that is 9” square x 2” high, with a square cookie style foot, in a three-step process (23 x 5 cm).
WavEdge Mold Process Overview
- The first step is to cast a glass foot disk using the C110 foot casting mold and 5.6 oz (160 g) of scrap-glass shards.
- Then design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
- The final step is to slump the design into the WavEdge Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Create your 9 square design, place it on the S220 mold and follow the slump firing schedule. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Bundle Package Contains:
- S220 WavEdge Slump Mold
- C110 Square Foot Casting Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B220 WavEdge Mold Instruction Booklet
$165.95 -
B225 Sushi-rise Mold Bundle with C110 Square Foot Casting Mold
$165.95 Add to cartB225 Sushi-rise Mold Bundle with C110 Square Foot Casting Mold
The Sushi-rise Mold Bundle enables glass fusers to create a sushi style platter that is 8.5” x 10.25” rectangle x 1-3/4” high (215 x 260 x 4.5 cm), with a square cookie style foot, in a three-step process.
- The first step is to cast a glass foot disk using the C110 foot casting mold and 5 oz (140 g) of scrap-glass shards.
- Then design and fuse a 8.5” x 10.25” (215 x 260) rectangle flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut your rectangle from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
- The final step is to slump the design into the Sushi-rise Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Create your rectangle design, place it on the S225 mold and follow the slump firing schedule. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.
Note: The fusing kiln chamber must be minimum 14” diameter by 6” deep (36 x 15 cm)
Click Here to Download the B225 Sushi-rise Mold Instruction Booklet
$165.95 -
S205 BinaSphere Cast and Slump Mold
$189.95 Add to cartS205 BinaSphere Cast and Slump Mold
It’s Two Molds in One – Create a 12″ Footed Bowl or a 12″ Footed Platter
One side of the BinaSphere Mold produces a true spherical-shaped 12″ diameter bowl with a cookie-style foot that is remarkably similar to vessels made by master glass blowers. The opposite side of the BinaSphere Mold produces a 12″ diameter flat serving platter. Both the Platter and the Bowl are elevated 5/8” (16 mm) on a cast glass foot that is also created in the Binasphere mold (in a separate cast firing).
Note: Kiln chamber must be minimum 13” diameter by 6” deep.
Mold Package Contains:
- S205 BinaSphere Cast-Slump Mold
- 4 page Instructional Booklet includes firing schedules
- 2 free eProjects available for Download
$189.95 -
S210 Flutter Mold (without foot mold)
$169.95 Add to cartS210 Flutter Mold (without foot mold)
The S210 Flutter Mold enables fusers to create an 11 1/4” (28.5 cm) bowl.
- The first step is to design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single layer 12” (30.5 cm) disk with fused design elements or create a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom, be the star.
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Note: Kiln chamber must be minimum 13” diameter by 6” deep (33 x 15 cm).
Mold Package Contains:
- S210 Flutter Slump Mold
- 4 page Instructional Booklet includes firing schedules
- 1 free eProject available for download
Click Here to Download the S210 Flutter Mold Instruction Booklet
$169.95 -
S220 WavEdge Mold (without foot mold)
$139.95 Add to cartS220 WavEdge Mold (without foot mold)
The S220 WavEdge Mold enables glass fusers to create a platter that is 9” square x 2” high (23 x 5 cm), with a square drop-slump foot, in a two-step process.
WavEdge Mold Process Overview
- The first step is to design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design. Or you could simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star (see example in the photo gallery using Freemont Glass).
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Package Contains:
- S220 WavEdge Slump Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B220 WavEdge Mold Instruction Booklet
$139.95 -
S225 Sushi-rise Mold (without foot casting mold)
$139.95 Add to cartS225 Sushi-rise Mold (without foot casting mold)
The S225 Sushi-rise Mold enables glass fusers to create a platter that is 9” square x 2” high (23 x 5 cm), with a square drop-slump foot, in a two-step process.
S225 Sushi-rise Mold Process Overview
- The first step is to design and fuse a 8.5” x 10.25” (215 x 260) rectangle flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut your rectangle from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star (see example in the photo gallery using green baroque glass).
- The final step is to place your design disk on the mold and follow the slump firing schedule that is included in the instruction booklet that comes with the mold. The center of your design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Mold Package Contains:
- S225 Sushi-rise Slump Mold
- 4 page Instructional Booklet
- Weblink to download one eProject with Video
Note: The fusing kiln chamber must be minimum 14” dia by 6” deep (36 x 15 cm)
Click Here to Download the B225 Sushi-rise Mold Instruction Booklet
$139.95 -
C105 Foot Casting Mold (for Flutter & Starfire Molds)
$42.95 Add to cartC105 Foot Casting Mold (for Flutter & Starfire Molds)
This is the same foot casting mold that comes with the B235 Starfire Mold Bundle AND the S210 Flutter Mold Bundle. Purchasing additional molds will enable you to cast multiple foot castings in a single kiln load.
$42.95 -
C110 Square Foot Casting Mold for WavEdge
$45.95 Add to cartC110 Square Foot Casting Mold for WavEdge
This is the same square foot casting mold that comes with the B220 WavEdge Mold Bundle. Purchasing additional molds will enable you to cast multiple foot castings in a single kiln load. Note: This is sold as the mold only and does not include the ZYP Lubricoat or any cast glass items.
$45.95 -
SSM812 Oval Stainless Steel Fusing Mold
$34.95 Add to cartSSM812 Oval Stainless Steel Fusing Mold
This 11 7/8″ by 8″ oval stainless steel mold will enable fusers to shape a beautiful 11 3/8″ x 7 1/2″ oval tray. The flat oval design can be either a single layer of glass (1/8” thick) with your design on it or it could be a double layer of glass (1/4” thick) plus design. This mold needs to be prepared by lightly sanding the surface with a very fine grit sandpaper or emery cloth then a good coating of mold release.
Click here to download the SSM812 Instruction Manual with oval pattern
$34.95