Instruction Booklets for Fusing Molds
Free Downloads for Wardell Products Fusing Molds
On this page you will find all the Instruction Booklets that ship with every new Fusing Mold
PLUS additional ePatterns and eProjects to give you some help and ideas for
projects you can create using our Innovative Fusing Molds
Instruction Booklet for the B220 WavEdge Mold Bundle
The Flutter Mold Bundle enables glass fusers to create a 9” (23 cm) Square Footed Platter in a three-step process.
The first step is to cast a square glass foot using the C110 foot casting mold and 5.6 oz (160 g) of scrap-glass shards.
Then design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
The final step is to slump the design into the WavEdge Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Simply create your 9.25” (23.5 cm) square design, place it on the S220 mold and follow the slump firing schedule that will find in this booklet. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.
Click here to download the B220 WavEdge Mold Instruction Booklet
Instruction Booklet for the B210 Flutter Mold Bundle
The Flutter Mold Bundle enables glass fusers to create an 11 5/8” (29.5 cm) x 2 5/8” (6.7 cm) high, footed bowl in a three-step process.
1. The first step is to cast a glass foot disc using the C105 foot casting mold and 4.6 oz (130 g) of scrap-glass shards.
2. Then design and fuse a 12” (30.5 cm) diameter flat design disk. This could be a single glass layer disk with fused design elements on it or it could be a two layer, full-fused design disk, or simply cut a 12” (30.5 cm) circle from a compelling piece of fusible art glass and let the design in the glass and the foot on the bottom be the star.
3. The final step is to slump the design disk into the Flutter Mold to shape the bowl and attach the cast glass foot to the underside in a single firing.
Note: This mold can shape a beautiful bowl without adding the cast glass foot. Simply create the design disk, place it on the S210 mold and follow the slump firing schedule included with the mold. The center of the design disk will slump into the foot cavity in the mold to form a slump-drop foot.
Click here to download the B210 Flutter Mold Instruction Booklet
Instruction Booklet for B300 Drop-Thru Mold
The innovative Drop-Thru Mold Forming System enables fusers to create a vase shape in a kiln that is remarkably similar to vessels made using traditional glass blowing techniques. This mold kit consists of 3 ceramic components and this 4 page instructional booklet demonstrates the Triangle Tangle vase. Download the Full-size Pattern for the Triangle Tangle vase below.
Click here to download the B300 Drop-Thru Mold Instruction Booklet
Triangle Tangle ePattern for the B300 Drop-Thru Mold
This PDF is the full-size pattern only for this project. Please download the Instruction Booklet for the B300 Drop-Thru Mold (above) for instructions and firing schedules.
Double Triangle Vase ePattern for the B300 Drop-Thru Mold
This PDF is the full-size pattern only for this project. Please download the Instruction Booklet for the B300 Drop-Thru Mold (above) for instructions and firing schedules.
Instruction Booklet for the B310 Drop-Thru Mold
This is the 4 page instruction booklet for the Circle-Square Drop Ring. The innovative Drop-Thru Mold Forming System enables fusers to create a vase shape in a kiln that is remarkably similar to vessels made using traditional glass blowing techniques. This mold kit consists of 3 ceramic components and this 4 page instructional booklet demonstrates this Tunnel Funnel vase. Download the Full-size Pattern for the Tunnel Funnel vase below.
Click here to download the B310 Drop-Thru Mold Instruction Booklet
Tunnel Funnel Vase ePattern for the B310 Drop-Thru Mold
This PDF is the full-size pattern only for this project. Please download the Instruction Booklet for the B310 Drop-Thru Mold (above) for instructions and firing schedules.
Click here to download the Tunnel Funnel Vase ePattern
Instruction Booklet for the B235 Starfire Drape Mold with Foot Casting Mold
This is the 12 page instruction booklet for the B235 Starfire Drape Mold with the C105 Foot Casting Mold and F500 Stackable Foot Rings. This unusual mold enables fusers to create a shape in their kiln that is strikingly reminiscent of a blown glass bowl. The instructions include mold preparation and firing schedules plus basic instruction to create the Graffiti Bowl design shown below.
Click here to download the B253 Starfire Mold Instruction Booklet
Graffiti Bowl with Foot ePattern for the B235 Starfire Drape Mold
This PDF is the full-size pattern only for this project. Please download the Instruction Booklet for the B235 Starfire Drape Mold (above) for instructions and firing schedules or Register your mold (see next paragraph) to get the 27 page eProject.
Click here to download the Graffiti Bowl ePattern
Or better yet, if you have already purchased the B235 Starfire Drape Mold click here to Register your Starfire Mold then you will have access to download the Graffiti Bowl eProject that is a 27 page book with detailed step-by-step how-to information plus the full-size pattern that you can print on your desktop printer.
Instruction Booklet for the B105 Foot Casting Mold
This is the 4 page instruction booklet for the B105 Foot Casting Mold. Use this Foot Casting Mold along with the M35 Starfire Drape Mold and one set of F500 Stackable Foot Rings to create a spectacular bowl with a wineglass style foot. You can purchase more of the F500 Stackable Foot Rings in our webstore.
Click here to download instruction booklet for the B105 Foot Casting Mold
Instruction Booklet for the S205 Binasphere Mold
Or better yet, if you have already purchased the S205 Binasphere Mold click here to Register your Binasphere Mold then you will have access to download the the Astral Platter eProject and the Sawtooth Bowl eProject. These eProjects include an instructional video plus a 27 page book with detailed step-by-step how-to information plus the full-size pattern that you can print on your desktop printer. So what are you waiting for?
Sedona Platter ePattern for the S205 Binasphere Mold
This PDF is the full-size pattern only for this project. Please download the Instruction Booklet for the S205 Binasphere Mold (above) for instructions and firing schedules.
Fusing Project Log Sheet from Joy of Fusing (Page 17)
In 1905 Spanish philosopher George Santayana wrote these now famous words “Those who cannot remember the past are condemned to repeat it.” This fusing project log will help all fusers remember exactly what glass they used, resist materials, molds, and most importantly the firing schedule. You can download this PDF file then print out the forms as needed or you may want to consider purchasing one of our Fusing Log Pads with 25 Pre-printed Log Sheets on a Convenient Tear-Off Pad they only cost $9.95 but if you use the discount code FPL in the shopping cart, you can purchase as many as you want for just $7.50